Hopefully stop lag

mods/chatplus/init.lua

@@ -94,14 +94,18 @@ function chatplus.clean_players()
 			(not value.inbox or #value.inbox==0) and
 			(not value.ignore or #value.ignore==0)
 		) then
-			minetest.log("Deleting blank player "..key)
 			value[key] = nil
 		end
 	end
 	chatplus.save()
-	minetest.log("[Chatplus] Clean complete")
 end
 
+function cp_tick()
+	chatplus.clean_players()
+	minetest.after(30*60, cp_tick)
+end
+minetest.after(30*60, cp_tick)
+
 function chatplus.poke(name,player)
 	local function check(name,value)
 		if not chatplus.players[name][value] then
@@ -364,7 +368,7 @@ minetest.register_globalstep(function(dtime)
 						hud_elem_type = "text",
 						name = "MailText",
 						position = {x=0.55, y=0.52},
-						text=#value.inbox,
+						text=#value.inbox .. " /inbox",
 						scale = {x=1,y=1},
 						alignment = {x=0.5, y=0.5},
 					})

mods/chatplus/tmp.lua

@@ -0,0 +1,22 @@
+--[[
+if #msg > 200 then
+	local warn = warned[from] or { count = 0 }
+	warned[from] = warn
+	warn.count = warn.count + 1
+	warn.time = minetest.get_gametime()
+
+	if warn.count > 3 then
+		if been_kicked[from] then
+			minetest.kick_player(from, "Too long chat message! ")
+			been_kicked =
+		else
+			minetest.kick_player(from, "Too long chat message! Next time is temp-ban.")
+			been_kicked
+		end
+		return true
+	else
+		minetest.chat_send_player(from, "That chat message was rather long! " ..
+			(2 - warn.count) .. " warnings remaining.")
+	end
+end
+]]

mods/hudbars/API.md

@@ -1,174 +0,0 @@
-API documentation for the HUD bars mod 1.2.1
-============================================
-
-## Introduction
-This API allows you to add, change, hide and unhide custom HUD bars for this mod.
-
-## Overview
-To give you a *very* brief overview over this API, here is the basic workflow on how to add your own custom HUD bar:
-
-* Create images for your HUD bar
-* Call `hb.register_hudbar` to make the definition of the HUD bar known to this mod
-* Call `hb.init_hudbar` for each player for which you want to use previously defined HUD bar
-* Use `hb.change_hudbar` whenever you need to change the values of a HUD bar of a certain player
-* If you need it: Use `hb.hide_hudbar` and `hb.unhide_hudbar` to hide or unhide HUD bars of a certain player
-
-## The basic rules
-In order to use this API, you should be aware of a few basic rules in order to understand it:
-
-* A HUD bar is an approximate graphical representation of the ratio of a current value and a maximum value, i.e. current health of 15 and maximum health of 20. A full HUD bar represents 100%, an empty HUD bar represents 0%.
-* The current value must always be equal to or smaller then the maximum 
-* Both current value and maximum must not be smaller than 0
-* Both current value and maximum must be real numbers. So no NaN, infinity, etc.
-* The HUD bar will be hidden if the maximum equals 0. This is intentional.
-* The health and breath HUD bars are hardcoded.
-
-These are soft rules, the HUD bars mod will not enforce all of these.
-But this mod has been programmed under the assumption that these rules are followed, for integrity.
-
-## Adding a HUD bar
-To make a new HUD bar known to this mod, you need …
-
-* … an image of size 2×16 for the bar
-* … an icon of size 16×16 (optional)
-* … to register it with `hb.register_hudbar`
-
-### Bar image
-The image for the bar will be repeated horizontally to denote the “value” of the HUD bar.
-It **must** be of size 2×16.
-If neccessary, the image will be split vertically in half, and only the left half of the image
-is displayed. So the final HUD bar will always be displayed on a per-pixel basis.
-
-The default bar images are single-colored, but you can use other styles as well, for instance,
-a vertical gradient.
-
-### Icon
-A 16×16 image shown left of the HUD bar. This is optional.
-
-### `hb.register_hudbar(identifier, text_color, label, textures, default_start_value, default_start_max, default_start_hidden, format_string)`
-This function registers a new custom HUD bar definition to the HUD bars mod, so it can be later used to be displayed, changed, hidden
-and unhidden on a per-player basis.
-Note this does not yet display the HUD bar.
-
-The HUD bars will be displayed in a “first come, first serve” order. This mod does not allow fow a custom order or a way to set it
-manually in a reliable way.
-
-
-#### Parameters
-* `identifier`: A globally unique internal name for the HUD bar, will be used later to refer to it. Please only rely on alphanumeric characters for now. The identifiers “`health`” and “`breath`” are used internally for the built-in health and breath bar, respectively. Please do not use these names.
-* `text_color`: A 3-octet number defining the color of the text. The octets denote, in this order red, green and blue and range from `0x00` (complete lack of this component) to `0xFF` (full intensity of this component). Example: `0xFFFFFF` for white.
-* `label`: A string which is displayed on the HUD bar itself to describe the HUD bar. Try to keep this string short.
-* `textures`: A table with the following fields:
- * `bar`: The file name of the bar image (as string). This is only used for the `progress_bar` bar type (see `README.txt`, settings section).
- * `icon`: The file name of the icon, as string. For the `progress_bar` type, it is shown as single image left of the bar, for the two statbar bar types, it is used as the statbar icon and will be repeated. This field can be `nil`, in which case no icon will be used, but this is not recommended, because the HUD bar will be invisible if the one of the statbar bar types is used.
- * `bgicon`: The file name of the background icon, it is used as the background for the modern statbar mode only. This field can be `nil`, in which case no background icon will be displayed in this mode.
-* `default_start_value`: If this HUD bar is added to a player, and no initial value is specified, this value will be used as initial current value
-* `default_max_value`: If this HUD bar is added to a player, and no initial maximum value is specified, this value will be used as initial maximum value
-* `default_start_hidden`: The HUD bar will be initially start hidden by default when added to a player. Use `hb.unhide_hudbar` to unhide it.
-* `format_string`: This is optional; You can specify an alternative format string display the final text on the HUD bar. The default format string is “`%s: %d/%d`” (in this order: Label, current value, maximum value). See also the Lua documentation of `string.format`.
-
-#### Return value
-Always `nil`.
-
-
-## Displaying a HUD bar
-After a HUD bar has been registered, they are not yet displayed yet for any player. HUD bars must be
-explicitly initialized on a per-player basis.
-
-You probably want to do this in the `minetest.register_on_joinplayer`.
-
-### `hb.init_hudbar(player, identifier, start_value, start_max, start_hidden)`
-This function initialzes and activates a previously registered HUD bar and assigns it to a
-certain client/player. This has only to be done once per player and after that, you can change
-the values using `hb.change_hudbar`.
-
-However, if `start_hidden` was set to `true` for the HUD bar (in `hb.register_hudbar`), the HUD bar
-will initially be hidden, but the HUD elements are still sent to the client. Otherwise,
-the HUD bar will be initially be shown to the player.
-
-#### Parameters
-* `player`: `ObjectRef` of the player to which the new HUD bar should be displayed to.
-* `identifier`: The identifier of the HUD bar type, as specified in `hb.register_hudbar`.
-* `start_value`: The initial current value of the HUD bar. This is optional, `default_start_value` of the registration function will be used, if this is `nil`.
-* `start_max`: The initial maximum value of the HUD bar. This is optional, `default_start_max` of the registration function will be used, if this is `nil`
-* `start_hidden`: Whether the HUD bar is initially hidden. This is optional, `default_start_hidden` of the registration function will be used as default
-
-#### Return value
-Always `nil`.
-
-
-
-## Modifying a HUD bar
-After a HUD bar has been added, you can change the current and maximum value on a per-player basis.
-You use the function `hb.change_hudbar` for this.
-
-### `hb.change_hudbar(player, identifier, new_value, new_max_value)`
-Changes the values of an initialized HUD bar for a certain player. `new_value` and `new_max_value`
-can be `nil`; if one of them is `nil`, that means the value is unchanged. If both values
-are `nil`, this function is a no-op.
-This function also tries minimize the amount of calls to `hud_change` of the Minetest Lua API, and
-therefore, network traffic. `hud_change` is only called if it is actually needed, i.e. when the
-actual length of the bar or the displayed string changed, so you do not have to worry about it.
-
-#### Parameters
-* `player`: `ObjectRef` of the player to which the HUD bar belongs to
-* `identifier`: The identifier of the HUD bar type to change, as specified in `hb.register_hudbar`.
-* `new_value`: The new current value of the HUD bar
-* `new_max_value`: The new maximum value of the HUD bar
-
-#### Return value
-Always `nil`.
-
-
-## Hiding and unhiding a HUD bar
-You can also hide custom HUD bars, meaning they will not be displayed for a certain player. You can still
-use `hb.change_hudbar` on a hidden HUD bar, the new values will be correctly displayed after the HUD bar
-has been unhidden. Both functions will only call `hud_change` if there has been an actual change to avoid
-unneccessary traffic.
-
-Note that the hidden state of a HUD bar will *not* be saved by this mod on server shutdown, so you may need
-to write your own routines for this or by setting the correct value for `start_hidden` when calling
-`hb.init_hudbar`.
-
-### `hb.hide_hudbar(player, identifier)`
-Hides the specified HUD bar from the screen of the specified player.
-
-#### Parameters
-* `player`: `ObjectRef` of the player to which the HUD bar belongs to
-* `identifier`: The identifier of the HUD bar type to hide, as specified in `hb.register_hudbar`.
-
-#### Return value
-Always `nil`.
-
-
-### `hb.unhide_hudbar(player, identifier)`
-Makes a previously hidden HUD bar visible again to a player.
-
-#### Parameters
-* `player`: `ObjectRef` of the player to which the HUD bar belongs to
-* `identifier`: The identifier of the HUD bar type to unhide, as specified in `hb.register_hudbar`.
-
-#### Return value
-Always `nil`.
-
-
-## Reading HUD bar information
-It is also possible to read information about an active HUD bar.
-
-### `hb.get_hudbar_state(player, identifier)`
-Returns the current state of the active player's HUD bar.
-
-#### Parameters
-* `player`: `ObjectRef` of the player to which the HUD bar belongs to
-* `identifier`: The identifier of the HUD bar type to hide, as specified in `hb.register_hudbar`.
-
-#### Return value
-A table which holds information on the current state of the HUD bar. Note the table is a deep
-copy of the internal HUD bar state, it is *not* a reference; the information hold by the table is
-only true for the moment you called this function. The fields of this table are:
-
-* `value`: Current value of HUD bar.
-* `max`: Current maximum value of HUD bar.
-* `hidden`: Boolean denoting whether the HUD bar is hidden.
-* `barlength`: The length of the HUD bar in pixels. This field is meaningless if the HUD bar is currently hidden.
-* `text`: The text shown on the HUD bar. This fiels is meaningless if the HUD bar is currently hidden.

mods/hudbars/README.txt

@@ -1,109 +0,0 @@
-Minetest mod: HUD bars
-======================
-Version: 1.2.1
-
-This software uses semantic versioning, as defined by version 2.0.0 of the SemVer
-standard. <http://semver.org/>
-
-
-License of source code: WTFPL
------------------------------
-Author: Wuzzy (2015)
-Forked from the “Better HUD” [hud] mod by BlockMen.
-
-
-Using the mod:
---------------
-This mod changes the HUD of Minetest. It replaces the default health and breath symbols by horizontal colored bars with text showing
-the number.
-
-Furthermore, it enables other mods to add their own custom bars to the HUD, this mod will place them accordingly.
-
-You can create a “hudbars.conf” file to customize the positions of the health and breath bars. Take a look at “hudbars.conf.example”
-to get more infos. The lines starting with “--” are comments, remove the two dashes to activate a setting. Settings which are not
-set will use a default value instead.
-
-
-IMPORTANT:
-Keep in mind if running a server with this mod, that the custom position should be displayed correctly on every screen size!
-
-Settings:
----------
-This mod can be configured by editing minetest.conf. Currently, the following setting is recognized:
-
-- hudbars_autohide_breath: A boolean setting, it can be either “true” or “false”. If set to “true”,
-  the breath bar will be automatically hidden shortly after the breathbar has been filled up. If set
-  to “false”, the breath bar will always be displayed. The default value is “true”.
-
-- hudbars_sorting: This setting allows you to specify the “slot” positions of the HUD bars manually.
-
-  The setting has to be specified as a comma-seperated list of key=value pairs, where a key refers to the
-  identifier of a HUD bar and the value refers to the slot number of where the HUD bar should be placed.
-  The slot number must be an integer greater of equal to 0. The slot positions start (slot 0) at the
-  bottom (nearest to hotbar in default configuration) left side, the following slot 1 is at the right
-  side, slot `2` is on the right side again, but placed over the first HUD bar (slot 0), and it goes on,
-  in a zig-zag pattern.
-  All HUD bars to which no sorting rule has been applied will fill in all slots which have not been occupied
-  by the HUD bars specified in this setting, the slots will be filled in from the lowest slot number.
-  Note that the order of those remaining HUD bars is *not* fixed, it basically just boils down on which mod
-  “came” first. Don't worry, the mod will still work perfectly fine, this setting is entirely optional.
-
-  Be careful not to use slot indices twice, or else different HUD bars will be drawn over each other!
-
-  If this setting is not set, by default the health and breath bar are displayed at slot positions 0 and 1,
-  respectively (health bar at left bottom-most positoin, breath bar right from it). All other HUD bars are
-  placed automatically.
-
-  Example value:
-    breath=0, health=1
-  This places the breath bar at the left side, and the health bar to the right side.
-
-- hudbars_bar_type: Specifies the style of bars. You can select between the default progress-bar-like bars and the good old statbars
-  like you know from vanilla Minetest. Note that the classic and modern statbars are still a little bit experimental.
-  These values are possible:
-    - progress_bar:    A horizontal progress-bar-like bar with a label, showing numerical value (current, maximum), and an icon.
-                       These bars usually convey the most information. This is the default and recommended value..
-    - statbar_classic: Classic statbar, like in vanilla Minetest. Made out of up to 20 half-symbols. Those bars represent the vague ratio between
-                       the current value and the maximum value. 1 half-symbol stands for approximately 5% of the maximum value.
-    - statbar_modern:  Like the classic statbar, but also supports background images, this kind of statbar may be considered to be more user-friendly
-                       than the classic statbar. This bar type closely resembles the [hud] mod.
-
-- hudbars_vmargin: The vertical distance between two HUD bars in pixels (default: 24)
-- hudbars_tick: The number of seconds between two updates of the HUD bars. Increase this number if you have a slow server (default: 0.1)
-
-Position settings:
-With these settings you can configure the positions of the HUD bars. All settings must be specified as a number.
-The pos settings are specified as a floating-point number between 0 to 1 each, the start_offset settings are
-specified as whole numbers, they specify a number of pixels.
-The left and right variants are used for the zig-zag mode. In the stack_up and stack_down modes, only the left variant is used for
-the base position
-
-- hudbars_pos_left_x, hudbars_pos_left_y: Screen position (x and y) of the left HUD bar in zigzag mode. 0 is left-most/top, 1 is right-most/bottom.
-	Defaults: 0.5 (x) and 1 (y)
-- hudbars_pos_right_x, hudbars_pos_right_y: Same as above, but for the right one.
-	Defaults: 0.5 and 1.
-- hudbars_start_offset_left_x, hudbars_start_offset_left_y: Offset in pixels from the basic screen position specified in hudbars_pos_left_x/hudbars_pos_left_y.
-	Defaults: -175 and -86
-- hudbars_start_offset_right_x, hudbars_start_offset_right_y: Same as above, but for the right one.
-	Defaults: 15 and -86
-
-API:
-----
-The API is used to add your own custom HUD bars.
-Documentation for the API of this mod can be found in API.md.
-
-
-License of textures:
---------------------
-hudbars_icon_health.png - celeron55 (CC BY-SA 3.0), modified by BlockMen
-hudbars_bgicon_health.png - celeron55 (CC BY-SA 3.0), modified by BlockMen
-hudbars_icon_breath.png - kaeza (WTFPL), modified by BlockMen
-hudbars_bar_health.png - Wuzzy (WTFPL)
-hudbars_bar_breath.png - Wuzzy (WTFPL)
-hudbars_bar_background.png - Wuzzy(WTFPL)
-
-This program is free software. It comes without any warranty, to
-the extent permitted by applicable law. You can redistribute it
-and/or modify it under the terms of the Do What The Fuck You Want
-To Public License, Version 2, as published by Sam Hocevar. See
-http://sam.zoy.org/wtfpl/COPYING for more details.

mods/hudbars/changelog.txt

@@ -1,66 +0,0 @@
-Note: This software uses semantic versioning,
-as of version 2.0.0 of the standard <http://semver.org/>.
-
-0.1.0
------
-- Initial release, forked from mod “Better HUD” [hud].
-
-0.2.0
------
-- Add API documentation
-
-0.3.0
------
-- Rename main table from “hud” to “hb” (affects function names!)
-- Arguments 3-4 of hb.change_hudbar can be nil for values which should not change
-- Add proper function hb.init_hudbar, replaces odd call to hud.hudtables[identifier].add_all
-- Update API documentation and fix mistakes
-- Use “hudbars.conf” instead of “hud.conf”
-
-0.4.0
------
-- New function: hb.get_hudbar_state to get information about the state of an active HUD bar, such as values, whether it is hidden, etc.
-- hb.change_hudbar has been optimized to call hud_change fewer times, which is hopefully good for networking
-- Rename hb.register_hudbar parameter “start_hide” to “start_hidden”
-- start_hidden parameter now finally works
-- Do not affect other HUD flags (crosshair, wielditem, etc.) when starting mod
-- Show error message when trying to call hb.init_hudbar or hb.change_hudbar with bad values
-- Update documentation
-- Lots of refactoring
-- Health and breath bar now use API
-
-1.0.0
------
-- Add new parameter start_hidden to hb.init_hudbar, specified whether HUD bar is hidden on start
-- Copy-editing of API.md and README.txt
-- Internal: Fix add_all weirdness
-
-1.0.1
------
-- Fix race condition causing crash at start of server
-
-1.0.2
------
-- Fix other HUD elements disappearing for rejoining players
-- Remove pointless delays for initializing the HUD for new or rejoining players
-
-1.0.3
------
-- Adjust default HUD bars position for Minetest 0.4.12
-
-1.1.0
------
-- Add boolean minetest.conf setting support (hudbars_autohide_breathbar) to control whether the breath bar is automatically hidden when full (default: yes)
-
-1.2.0
------
-- New setting: hudbars_sorting. You can now manually sort all the HUD bars. Useful if you don't like automatic order
-- New setting: hudbars_bar_type. You now can change the appearance of the HUD bars.
-- New HUD bar types, slightly experimental: Classic statbars and modern [hud]-style statbars
-- New experimental/unfinished setting: hudbars_alignment_pattern: You can now make the HUD bars stack vertically instead of the current zig-zag pattern. Note you probably need to change source code to productively use this feature
-- Various position-related HUD bar settings (see README.txt)
-- Remove hudbars.conf support and hudbars.conf.example (was never officially supported anyways)
-
-1.2.1
------
-- Fix crash when enable_damage is changed in mid-game

mods/hudbars/init.lua

@@ -1,477 +0,0 @@
-hb = {}
-
-hb.hudtables = {}
-
--- number of registered HUD bars
-hb.hudbars_count = 0
-
--- table which records which HUD bar slots have been “registered” so far; used for automatic positioning
-hb.registered_slots = {}
-
-hb.settings = {}
-
-function hb.load_setting(sname, stype, defaultval, valid_values)
-	local sval
-	if stype == "string" then
-		sval = minetest.setting_get(sname)
-	elseif stype == "bool" then
-		sval = minetest.setting_getbool(sname)
-	elseif stype == "number" then
-		sval = tonumber(minetest.setting_get(sname))
-	end
-	if sval ~= nil then
-		if valid_values ~= nil then
-			local valid = false
-			for i=1,#valid_values do
-				if sval == valid_values[i] then
-					valid = true
-				end
-			end
-			if not valid then
-				minetest.log("error", "[hudbars] Invalid value for "..sname.."! Using default value ("..tostring(defaultval)..").")
-				return defaultval
-			else
-				return sval
-			end
-		else
-			return sval
-		end
-	else
-		return defaultval
-	end
-end
-
--- (hardcoded) default settings
-hb.settings.max_bar_length = 160
-hb.settings.statbar_length = 20
-
--- statbar positions
-hb.settings.pos_left = {}
-hb.settings.pos_right = {}
-hb.settings.start_offset_left = {}
-hb.settings.start_offset_right= {}
-hb.settings.pos_left.x = hb.load_setting("hudbars_pos_left_x", "number", 0.5)
-hb.settings.pos_left.y = hb.load_setting("hudbars_pos_left_y", "number", 1)
-hb.settings.pos_right.x = hb.load_setting("hudbars_pos_right_x", "number", 0.5)
-hb.settings.pos_right.y = hb.load_setting("hudbars_pos_right_y", "number", 1)
-hb.settings.start_offset_left.x = hb.load_setting("hudbars_start_offset_left_x", "number", -175)
-hb.settings.start_offset_left.y = hb.load_setting("hudbars_start_offset_left_y", "number", -86)
-hb.settings.start_offset_right.x = hb.load_setting("hudbars_start_offset_right_x", "number", 15)
-hb.settings.start_offset_right.y = hb.load_setting("hudbars_start_offset_right_y", "number", -86)
-
-hb.settings.vmargin  = hb.load_setting("hudbars_tick", "number", 24)
-hb.settings.tick = hb.load_setting("hudbars_tick", "number", 0.1)
-
--- experimental setting: Changing this setting is not officially supported, do NOT rely on it!
-hb.settings.forceload_default_hudbars = hb.load_setting("hudbars_forceload_default_hudbars", "bool", true)
-
---[[
-- hudbars_alignment_pattern: This setting changes the way the HUD bars are ordered on the display. You can choose
-  between a zig-zag pattern or a vertically stacked pattern.
-  The following values are allowed:
-    zigzag: Starting from the left bottom, the next is right from the first,
-              the next is above the first, the next is right of the third, etc.
-              This is the default.
-    stack_up: The HUD bars are stacked vertically, going upwards.
-    stack_down: The HUD bars are stacked vertically, going downwards.
-]]
-
--- Misc. settings
-hb.settings.alignment_pattern = hb.load_setting("hudbars_alignment_pattern", "string", "zigzag", {"zigzag", "stack_up", "stack_down"})
-hb.settings.bar_type = hb.load_setting("hudbars_bar_type", "string", "progress_bar", {"progress_bar", "statbar_classic", "statbar_modern"})
-hb.settings.autohide_breath = hb.load_setting("hudbars_autohide_breath", "bool", true)
-
-local sorting = minetest.setting_get("hudbars_sorting")
-if sorting ~= nil then
-	hb.settings.sorting = {}
-	hb.settings.sorting_reverse = {}
-	for k,v in string.gmatch(sorting, "(%w+)=(%w+)") do
-		hb.settings.sorting[k] = tonumber(v)
-		hb.settings.sorting_reverse[tonumber(v)] = k
-	end
-else
-	hb.settings.sorting = { ["health"] = 0, ["breath"] = 1 }
-	hb.settings.sorting_reverse = { [0] = "health", [1] = "breath" }
-end
-
--- Table which contains all players with active default HUD bars (only for internal use)
-hb.players = {}
-
-function hb.value_to_barlength(value, max)
-	if max == 0 then
-		return 0
-	else
-		if hb.settings.bar_type == "progress_bar" then
-			local x
-			if value < 0 then x=-0.5 else x = 0.5 end
-			local ret = math.modf((value/max) * hb.settings.max_bar_length + x)
-			return ret
-		else
-			local x
-			if value < 0 then x=-0.5 else x = 0.5 end
-			local ret = math.modf((value/max) * hb.settings.statbar_length + x)
-			return ret
-		end
-	end
-end
-
-function hb.get_hudtable(identifier)
-	return hb.hudtables[identifier]
-end
-
-function hb.get_hudbar_position_index(identifier)
-	if hb.settings.sorting[identifier] ~= nil then
-		return hb.settings.sorting[identifier]
-	else
-		local i = 0
-		while true do
-			if hb.registered_slots[i] ~= true and hb.settings.sorting_reverse[i] == nil then
-				return i
-			end
-			i = i + 1
-		end
-	end
-end
-
-function hb.register_hudbar(identifier, text_color, label, textures, default_start_value, default_start_max, default_start_hidden, format_string)
-	minetest.log("action", "hb.register_hudbar: "..tostring(identifier))
-	local hudtable = {}
-	local pos, offset
-	local index = math.floor(hb.get_hudbar_position_index(identifier))
-	hb.registered_slots[index] = true
-	if hb.settings.alignment_pattern == "stack_up" then
-		pos = hb.settings.pos_left
-		offset = {
-			x = hb.settings.start_offset_left.x,
-			y = hb.settings.start_offset_left.y - hb.settings.vmargin * index
-		}
-	elseif hb.settings.alignment_pattern == "stack_down" then
-		pos = hb.settings.pos_left
-		offset = {
-			x = hb.settings.start_offset_left.x,
-			y = hb.settings.start_offset_left.y + hb.settings.vmargin * index
-		}
-	else
-		if index % 2 == 0 then
-			pos = hb.settings.pos_left
-			offset = {
-				x = hb.settings.start_offset_left.x,
-				y = hb.settings.start_offset_left.y - hb.settings.vmargin * (index/2)
-			}
-		else
-			pos = hb.settings.pos_right
-			offset = {
-				x = hb.settings.start_offset_right.x,
-				y = hb.settings.start_offset_right.y - hb.settings.vmargin * ((index-1)/2)
-			}
-		end
-	end
-	if format_string == nil then
-		format_string = "%s: %d/%d"
-	end
-
-	hudtable.add_all = function(player, hudtable, start_value, start_max, start_hidden)
-		if start_value == nil then start_value = hudtable.default_start_value end
-		if start_max == nil then start_max = hudtable.default_start_max end
-		if start_hidden == nil then start_hidden = hudtable.default_start_hidden end
-		local ids = {}
-		local state = {}
-		local name = player:get_player_name()
-		local bgscale, iconscale, text, barnumber
-		if start_max == 0 or start_hidden then
-			bgscale = { x=0, y=0 }
-		else
-			bgscale = { x=1, y=1 }
-		end
-		if start_hidden then
-			iconscale = { x=0, y=0 }
-			barnumber = 0
-			text = ""
-		else
-			iconscale = { x=1, y=1 }
-			barnumber = hb.value_to_barlength(start_value, start_max)
-			text = string.format(format_string, label, start_value, start_max)
-		end
-		if hb.settings.bar_type == "progress_bar" then
-			ids.bg = player:hud_add({
-				hud_elem_type = "image",
-				position = pos,
-				scale = bgscale,
-				text = "hudbars_bar_background.png",
-				alignment = {x=1,y=1},
-				offset = { x = offset.x - 1, y = offset.y - 1 },
-			})
-			if textures.icon ~= nil then
-				ids.icon = player:hud_add({
-					hud_elem_type = "image",
-					position = pos,
-					scale = iconscale,
-					text = textures.icon,
-					alignment = {x=-1,y=1},
-					offset = { x = offset.x - 3, y = offset.y },
-				})
-			end
-		elseif hb.settings.bar_type == "statbar_modern" then
-			if textures.bgicon ~= nil then
-				ids.bg = player:hud_add({
-					hud_elem_type = "statbar",
-					position = pos,
-					scale = bgscale,
-					text = textures.bgicon,
-					number = hb.settings.statbar_length,
-					alignment = {x=-1,y=-1},
-					offset = { x = offset.x, y = offset.y },
-				})
-			end
-		end
-		local bar_image
-		if hb.settings.bar_type == "progress_bar" then
-			bar_image = textures.bar
-		elseif hb.settings.bar_type == "statbar_classic" or hb.settings.bar_type == "statbar_modern" then
-			bar_image = textures.icon
-		end
-		ids.bar = player:hud_add({
-			hud_elem_type = "statbar",
-			position = pos,
-			text = bar_image,
-			number = barnumber,
-			alignment = {x=-1,y=-1},
-			offset = offset,
-		})
-		if hb.settings.bar_type == "progress_bar" then
-			ids.text = player:hud_add({
-				hud_elem_type = "text",
-				position = pos,
-				text = text,
-				alignment = {x=1,y=1},
-				number = text_color,
-				direction = 0,
-				offset = { x = offset.x + 2,  y = offset.y },
-		})
-		end
-		-- Do not forget to update hb.get_hudbar_state if you add new fields to the state table
-		state.hidden = start_hidden
-		state.value = start_value
-		state.max = start_max
-		state.text = text
-		state.barlength = hb.value_to_barlength(start_value, start_max)
-
-		local main_error_text =
-			"[hudbars] Bad initial values of HUD bar identifier “"..tostring(identifier).."” for player "..name..". "
-
-		if start_max < start_value then
-			minetest.log("error", main_error_text.."start_max ("..start_max..") is smaller than start_value ("..start_value..")!")
-		end
-		if start_max < 0 then
-			minetest.log("error", main_error_text.."start_max ("..start_max..") is smaller than 0!")
-		end
-		if start_value < 0 then
-			minetest.log("error", main_error_text.."start_value ("..start_value..") is smaller than 0!")
-		end
-
-		hb.hudtables[identifier].hudids[name] = ids
-		hb.hudtables[identifier].hudstate[name] = state
-	end
-
-	hudtable.identifier = identifier
-	hudtable.format_string = format_string
-	hudtable.label = label
-	hudtable.hudids = {}
-	hudtable.hudstate = {}
-	hudtable.default_start_hidden = default_start_hidden
-	hudtable.default_start_value = default_start_value
-	hudtable.default_start_max = default_start_max
-
-	hb.hudbars_count= hb.hudbars_count + 1
-
-	hb.hudtables[identifier] = hudtable
-end
-
-function hb.init_hudbar(player, identifier, start_value, start_max, start_hidden)
-	local hudtable = hb.get_hudtable(identifier)
-	hb.hudtables[identifier].add_all(player, hudtable, start_value, start_max, start_hidden)
-end
-
-function hb.change_hudbar(player, identifier, new_value, new_max_value)
-	if new_value == nil and new_max_value == nil then
-		return
-	end
-
-	local name = player:get_player_name()
-	local hudtable = hb.get_hudtable(identifier)
-	local value_changed, max_changed = false, false
-
-	if new_value ~= nil then
-		if new_value ~= hudtable.hudstate[name].value then
-			hudtable.hudstate[name].value = new_value
-			value_changed = true
-		end
-	else
-		new_value = hudtable.hudstate[name].value
-	end
-	if new_max_value ~= nil then
-		if new_max_value ~= hudtable.hudstate[name].max then
-			hudtable.hudstate[name].max = new_max_value
-			max_changed = true
-		end
-	else
-		new_max_value = hudtable.hudstate[name].max
-	end
-
-	local main_error_text =
-		"[hudbars] Bad call to hb.change_hudbar, identifier: “"..tostring(identifier).."”, player name: “"..name.."”. "
-	if new_max_value < new_value then
-		minetest.log("error", main_error_text.."new_max_value ("..new_max_value..") is smaller than new_value ("..new_value..")!")
-	end
-	if new_max_value < 0 then
-		minetest.log("error", main_error_text.."new_max_value ("..new_max_value..") is smaller than 0!")
-	end
-	if new_value < 0 then
-		minetest.log("error", main_error_text.."new_value ("..new_value..") is smaller than 0!")
-	end
-
-	if hudtable.hudstate[name].hidden == false then
-		if max_changed and hb.settings.bar_type == "progress_bar" then
-			if hudtable.hudstate[name].max == 0 then
-				player:hud_change(hudtable.hudids[name].bg, "scale", {x=0,y=0})
-			else
-				player:hud_change(hudtable.hudids[name].bg, "scale", {x=1,y=1})
-			end
-		end
-
-		if value_changed or max_changed then
-			local new_barlength = hb.value_to_barlength(new_value, new_max_value)
-			if new_barlength ~= hudtable.hudstate[name].barlength then
-				player:hud_change(hudtable.hudids[name].bar, "number", hb.value_to_barlength(new_value, new_max_value))
-				hudtable.hudstate[name].barlength = new_barlength
-			end
-
-			if hb.settings.bar_type == "progress_bar" then
-				local new_text = string.format(hudtable.format_string, hudtable.label, new_value, new_max_value)
-				if new_text ~= hudtable.hudstate[name].text then
-					player:hud_change(hudtable.hudids[name].text, "text", new_text)
-					hudtable.hudstate[name].text = new_text
-				end
-			end
-		end
-	end
-end
-
-function hb.hide_hudbar(player, identifier)
-	local name = player:get_player_name()
-	local hudtable = hb.get_hudtable(identifier)
-	if(hudtable.hudstate[name].hidden == false) then
-		if hb.settings.bar_type == "progress_bar" then
-			if hudtable.hudids[name].icon ~= nil then
-				player:hud_change(hudtable.hudids[name].icon, "scale", {x=0,y=0})
-			end
-			player:hud_change(hudtable.hudids[name].bg, "scale", {x=0,y=0})
-			player:hud_change(hudtable.hudids[name].text, "text", "")
-		end
-		player:hud_change(hudtable.hudids[name].bar, "number", 0)
-		hudtable.hudstate[name].hidden = true
-	end
-end
-
-function hb.unhide_hudbar(player, identifier)
-	local name = player:get_player_name()
-	local hudtable = hb.get_hudtable(identifier)
-	if(hudtable.hudstate[name].hidden) then
-		local name = player:get_player_name()
-		local value = hudtable.hudstate[name].value
-		local max = hudtable.hudstate[name].max
-		if hb.settings.bar_type == "progress_bar" then
-			if hudtable.hudids[name].icon ~= nil then
-				player:hud_change(hudtable.hudids[name].icon, "scale", {x=1,y=1})
-			end
-			if hudtable.hudstate[name].max ~= 0 then
-				player:hud_change(hudtable.hudids[name].bg, "scale", {x=1,y=1})
-			end
-			player:hud_change(hudtable.hudids[name].text, "text", tostring(string.format(hudtable.format_string, hudtable.label, value, max)))
-		end
-		player:hud_change(hudtable.hudids[name].bar, "number", hb.value_to_barlength(value, max))
-		hudtable.hudstate[name].hidden = false
-	end
-end
-
-function hb.get_hudbar_state(player, identifier)
-	local ref = hb.get_hudtable(identifier).hudstate[player:get_player_name()]
-	-- Do not forget to update this chunk of code in case the state changes
-	local copy = {
-		hidden = ref.hidden,
-		value = ref.value,
-		max = ref.max,
-		text = ref.text,
-		barlength = ref.barlength,
-	}
-	return copy
-end
-
---register built-in HUD bars
-if minetest.setting_getbool("enable_damage") or hb.settings.forceload_default_hudbars then
-	hb.register_hudbar("health", 0xFFFFFF, "Health", { bar = "hudbars_bar_health.png", icon = "hudbars_icon_health.png", bgicon = "hudbars_bgicon_health.png" }, 20, 20, false)
-	hb.register_hudbar("breath", 0xFFFFFF, "Breath", { bar = "hudbars_bar_breath.png", icon = "hudbars_icon_breath.png" }, 10, 10, true)
-end
-
-local function hide_builtin(player)
-	local flags = player:hud_get_flags()
-	flags.healthbar = false
-	flags.breathbar = false
-	player:hud_set_flags(flags)
-end
-
-
-local function custom_hud(player)
-	local hide = false
-	hb.init_hudbar(player, "health", player:get_hp(), nil, hide)
-	local breath = player:get_breath()
-	local hide_breath
-	if breath == 11 and hb.settings.autohide_breath == true then hide_breath = true else hide_breath = false end
-	hb.init_hudbar(player, "breath", math.min(breath, 10), nil, hide_breath or hide)
-end
-
-
--- update built-in HUD bars
-local function update_hud(player)
-	if hb.settings.forceload_default_hudbars then
-		hb.unhide_hudbar(player, "health")
-	end
-	--air
-	local breath = player:get_breath()
-
-	if breath == 11 and hb.settings.autohide_breath == true then
-		hb.hide_hudbar(player, "breath")
-	else
-		hb.unhide_hudbar(player, "breath")
-		hb.change_hudbar(player, "breath", math.min(breath, 10))
-	end
-
-	--health
-	hb.change_hudbar(player, "health", player:get_hp())
-end
-
-minetest.register_on_joinplayer(function(player)
-	hide_builtin(player)
-	custom_hud(player)
-	hb.players[player:get_player_name()] = player
-end)
-
-minetest.register_on_leaveplayer(function(player)
-	hb.players[player:get_player_name()] = nil
-end)
-
-local main_timer = 0
-local timer = 0
-minetest.register_globalstep(function(dtime)
-	main_timer = main_timer + dtime
-	timer = timer + dtime
-	if main_timer > hb.settings.tick or timer > 4 then
-		if main_timer > hb.settings.tick then main_timer = 0 end
-		-- only proceed if damage is enabled
-		for playername, player in pairs(hb.players) do
-			-- update all hud elements
-			update_hud(player)
-		end
-	end
-	if timer > 4 then timer = 0 end
-end)

mods/join_fs/api.lua

@@ -50,7 +50,7 @@ end
 function join_fs.show_next_slide(player)
 	for _, def in pairs(join_fs.slides) do
 		local pids = join_fs.players[player:get_player_name()] or {}
-		if not pids[def.name] and def.should_show(player) then
+		if def.should_show(player, pids[def.name]) then
 			def.show(player)
 			break
 		end

mods/join_fs/init.lua

@@ -4,7 +4,7 @@ dofile(minetest.get_modpath("join_fs") .. "/api.lua")
 
 join_fs.register_slide({
 	name = "rules",
-	should_show = function(player)
+	should_show = function(player, has_been_shown_before)
 		return not minetest.check_player_privs(player:get_player_name(), {interact=true})
 	end,
 	show = function(player)
@@ -62,39 +62,3 @@ minetest.register_on_player_receive_fields(function(player, form, fields)
 		join_fs.show_next_slide(player)
 	end
 end)
-
-join_fs.register_slide({
-	name = "blood",
-	should_show = function(player)
-		return true
-	end,
-	show = function(player)
-		local fs = "size[8,1.75]label[0,0;Would you like to see blood splatters when using a gun?]"
-		fs = fs .. " button_exit[0.5,0.5;3.5,2;yes;" ..
-			minetest.formspec_escape("Yes: Enable blood") .. "]"
-		fs = fs .. " button_exit[4,0.5;3.5,2;no;" ..
-			minetest.formspec_escape("No: Disable blood") .. "]"
-		minetest.show_formspec(player:get_player_name(), "join_fs:blood", fs)
-	end
-})
-
-minetest.register_on_player_receive_fields(function(player, form, fields)
-	if form == "join_fs:blood" then
-		local name  = player:get_player_name()
-
-		if fields.yes then
-			shooter:enable_blood(name)
-			minetest.chat_send_player(name, "You have choosen to see blood!")
-		elseif fields.no then
-			shooter:disable_blood(name)
-			minetest.chat_send_player(name, "You will no longer see blood!")
-		else
-			minetest.chat_send_player(name, "You need to choose an option!")
-			join_fs.show_next_slide(player)
-			return true
-		end
-
-		join_fs.confirm(name, "blood")
-		join_fs.show_next_slide(player)
-	end
-end)

mods/shooter/init.lua

@@ -23,5 +23,3 @@ end
 if SHOOTER_ENABLE_TURRETS == true then
 	dofile(modpath.."/turret.lua")
 end
-
-shooter:load_player_config()

mods/shooter/shooter.lua

@@ -4,8 +4,7 @@ shooter = {
 	rounds = {},
 	shots = {},
 	update_time = 0,
-	reload_time = 0,
+	reload_time = 0
-	players_enabled_blood = {}
 }
 
 SHOOTER_ADMIN_WEAPONS = false
@@ -71,43 +70,6 @@ local function get_particle_pos(p, v, d)
 	return vector.add(p, vector.multiply(v, {x=d, y=d, z=d}))
 end
 
-function shooter:load_player_config()
-	local filepath = minetest.get_worldpath() .. "/shooter_player_config.txt"
-	local file = io.open(filepath, "r")
-	if file then
-		local table = minetest.deserialize(file:read("*all"))
-		if type(table) == "table" then
-			self.players_enabled_blood = table.eblood
-			return
-		end
-	end
-end
-
-function shooter:save_player_config()
-	local filepath = minetest.get_worldpath() .. "/shooter_player_config.txt"
-	local file = io.open(filepath, "w")
-	if file then
-		file:write(minetest.serialize({
-			eblood = self.players_enabled_blood
-		}))
-		file:close()
-	else
-		minetest.log("warning", "Failed to save shooter player config!")
-	end
-end
-
-minetest.register_on_shutdown(function()
-	shooter:save_player_config()
-end)
-
-function shooter:enable_blood(name)
-	self.players_enabled_blood[name] = true
-end
-
-function shooter:disable_blood(name)
-	self.players_enabled_blood[name] = nil
-end
-
 function shooter:spawn_particles(pos, texture)
 	if not SHOOTER_ENABLE_PARTICLE_FX then
 		return
@@ -117,30 +79,6 @@ function shooter:spawn_particles(pos, texture)
 		texture = SHOOTER_EXPLOSION_TEXTURE
 	end
 	local spread = {x=0.1, y=0.1, z=0.1}
-	if texture == SHOOTER_EXPLOSION_TEXTURE then
-		for _, player in pairs(minetest.get_connected_players()) do
-			local name = player:get_player_name()
-			if shooter.players_enabled_blood[name] then
-				minetest.add_particlespawner({
-				    amount = 15,
-				    time = 0.3,
-				    minpos = vector.subtract(pos, spread),
-				    maxpos = vector.add(pos, spread),
-				    minvel = {x=-1, y=1, z=-1},
-				    maxvel = {x=1, y=2, z=1},
-				    minacc = {x=-2, y=-2, z=-2},
-				    maxacc = {x=2, y=-2, z=2},
-				    minexptime = 0.1,
-				    maxexptime = 0.75,
-				    minsize = 1,
-				    maxsize = 2,
-				    collisiondetection = false,
-				    texture = texture,
-				    playername = name
-				})
-			end
-		end
-	else
 	minetest.add_particlespawner({
 	    amount = 15,
 	    time = 0.3,
@@ -157,7 +95,6 @@ function shooter:spawn_particles(pos, texture)
 	    collisiondetection = false,
 	    texture = texture
 	})
-	end
 end
 
 function shooter:play_node_sound(node, pos)